The short answer
Lactic acid bacteria are most often counted by plate count: the sample is taken through a tenfold dilution series, pour plates or spread plates are prepared with MRS agar, and the colonies are counted after 48 to 72 hours of incubation in a low-oxygen atmosphere. For foods and feeds the usual international reference is ISO 15214. National methods also exist, and the method named by the regulator or the customer is the one that governs. When the different organisms in a product have to be counted separately, the medium changes to acidified MRS, M17 or MRS with antibiotics.
First decide what you are counting
"The lactic acid bacteria count" sounds like one number. In practice it can mean three different questions, and each uses a different medium.
| The question you have to answer | Usual medium | Common methods |
|---|---|---|
| How many lactic acid bacteria the product contains in total | MRS agar | ISO 15214, national methods |
| How many rods and how many cocci a yoghurt contains | Acidified MRS agar, M17 agar | ISO 7889 | IDF 117 |
| How much of a specific organism named on the label is present | MRS with antibiotics, dedicated bifidobacteria medium | ISO 20128 | IDF 192, ISO 29981 | IDF 220 |
Establish which of these the label claim or the customer requires, and then choose the method. A total lactic acid bacteria count will never agree with the declared count of an individual strain.
What each of the common methods does
ISO 15214: mesophilic lactic acid bacteria. Pour plates of MRS agar at pH 5.7, incubated at 30 °C for 72 hours. The method applies to foods and animal feeds in general. The standard itself points out that not all lactic acid bacteria grow well on MRS at pH 5.7.
ISO 7889 | IDF 117: characteristic microorganisms of yoghurt. Lactobacillus delbrueckii subsp. bulgaricus is counted on acidified MRS agar and Streptococcus thermophilus on M17 agar, so the two organisms are counted separately. This standard was revised in 2026; take the detailed conditions from the current edition.
ISO 20128 | IDF 192: Lactobacillus acidophilus. MRS agar with the antibiotics clindamycin and ciprofloxacin, incubated anaerobically at 37 °C for 72 hours. It is used to count L. acidophilus on its own in milk products that contain a mixed flora.
ISO 29981 | IDF 220: bifidobacteria. The medium is not MRS but TOS propionate agar with mupirocin, incubated anaerobically at 37 °C for 72 hours.
National methods. Many countries publish an official method of their own, and results reported to that country's regulator have to follow it. One example, for products shipped to Taiwan, is the Taiwan FDA (TFDA) method for lactic acid bacteria in foods (MOHWM0013.01): the sample is serially diluted in 0.1% peptone diluent and lactic acid bacteria are counted on MRS medium, with a separate medium for bifidobacteria.
Methods are revised, so work from the current text of the standard or official method. For the media named in Taiwan's official food microbiology methods, see Which culture media do Taiwan FDA food microbiology methods specify?
Five places where the technique most often goes wrong
1. Diluent
Use the diluent the method specifies; 0.1% peptone water is a common one. Plain water, or diluent taken straight from the refrigerator, injures the cells, and freeze-dried probiotic powders are especially vulnerable. Finish plating within 15 to 20 minutes of making the dilutions. Peptone, Bacteriological can be used as the peptone for the diluent.
2. Rehydrate freeze-dried powders and capsules first
If a probiotic powder or the contents of a capsule are diluted straight away, the cells are plated before they have recovered and the count comes out low. Homogenise the sample in the diluent and let it stand for a period so that the cells rehydrate, for the time given in the method or recommended by the supplier of the product.
3. Break up chains
Lactic acid bacteria often grow in chains or clumps, and a whole chain gives rise to a single colony. Mix thoroughly at every step of the dilution series to get reproducible results.
4. Pouring temperature
Cool MRS agar to 44 to 46 °C before pouring; agar that is too hot kills the cells. After pouring, a thin overlay of agar can be added to reduce the contact of the surface with oxygen.
5. Anaerobic conditions and incubation time
Most lactic acid bacteria form larger colonies that are easier to count in a low-oxygen atmosphere. Check that the indicator in the anaerobic jar has changed colour. The colonies are small, so incubate for at least the full time the method specifies before counting.
For general troubleshooting of counts that swing up and down, see Plate counts vary wildly between runs.
Is everything that grows on MRS agar a lactic acid bacterium?
Not necessarily. MRS holds back some competing organisms, but yeasts, some Bacillus species, enterococci and staphylococci can still grow. How to tell:
- Look at the colonies. Colonies of lactic acid bacteria are usually small, round and white to cream. Be suspicious of large, flat colonies with irregular edges.
- Confirm. Only Gram-positive, catalase-negative isolates count as lactic acid bacteria.
- Raise the selectivity. As the method directs, lower the pH to between 5.4 and 5.7 and incubate anaerobically. For samples with many yeasts, an agent that inhibits yeasts and moulds can be added where the method allows it.
FAQ
The count is far below the label claim. Is the medium at fault? Check the technique first. The diluent, the rehydration time, the pouring temperature and the anaerobic conditions can each shift the result by a whole log. Once these have been ruled out, compare the recovery of a reference strain on the old and the new batch of medium.
Pour plate or spread plate: which is better? In a pour plate the colonies are embedded in the agar and exposed to less oxygen, which suits lactic acid bacteria, and this is the technique most methods use. In a spread plate the colonies are on the surface and easier to pick, but the plates have to be incubated anaerobically. Do what the method specifies.
How long can poured MRS agar plates be kept? Bagged, refrigerated and used within their shelf life, which is generally two to four weeks. Plates kept too long dry out at the surface, and lactic acid bacteria form even smaller colonies on them. For the principles of storage, see How should peptones and dehydrated media be stored?
Does plant QC also need food-grade MRS agar? Test methods specify the formulation, not the grade. But where the product is sold in Muslim markets and the audit scope extends to laboratory materials, the Halal-certified Lactobacilli MRS Agar Food Grade makes the documentation easier to account for.
Related products
- Lactobacilli MRS Agar
- Lactobacilli MRS Agar Food Grade (food grade, Halal certified)
- M17 Agar Base
- Bifidobacterium Agar
For the differences between the five MRS products and which to choose, see the MRS media range.
