Antibiotic Medium 12
Also known as：Antibiotic Medium No. 12 · Antibiotic Assay Medium No. 12 · Nystatin Assay Agar · Antifungal Assay Agar
For the microbiological assay of antifungal antibiotics, such as amphotericin B and nystatin, by the cylinder-plate method.
- Category
- Dehydrated Culture Media
- Dissolve per litre
- 62.5 g
- Pack sizes
- 500 g · 5 kg · 25 kg
- Certifications
- ISO 22000
Data updated：2026-11-07
Overview
Antibiotic Medium 12 is a broth (liquid) medium, one of the numbered pharmacopoeial media for antibiotic potency assays. It is specified by the pharmacopoeia for particular antibiotics and test organisms in potency assays; numbers are not interchangeable. STBIO manufactures it from food-grade raw materials in an ISO 22000 certified facility, with a COA for every batch.
Principle
Antibiotic Medium 12 is used for the cylinder-plate assay of polyene antifungal antibiotics, with Saccharomyces cerevisiae as the test organism.¹ Peptone, yeast extract, and beef extract supply nitrogen, vitamins, minerals, and growth factors, and dextrose provides an abundant carbon and energy source for the yeast. Sodium chloride maintains the osmotic equilibrium, and the high agar concentration produces a firm gel that supports the assay cylinders. The antibiotic diffuses from the cylinders into the seeded agar, producing zones of inhibition whose diameters are proportional to its concentration. A short pre-diffusion period at a temperature below the optimum for growth allows the antibiotic to diffuse before the test organism multiplies, giving sharper and more reproducible zones. The slightly acidic pH favours the growth of the yeast test organism.²
Antibiotic potency assay media
Antibiotic potency assays measure activity through the response of a test organism, and each antibiotic and assay method calls for a specific numbered medium taken from the pharmacopoeial formulations. Select the number specified by the pharmacopoeial chapter and method you follow; the media are not interchangeable.
Directions
Suspend 62.5 g of powder in 1 L of purified water. Heat with continuous stirring and bring to the boil for 1 minute. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 45-50°C. Dispense into Petri plates or assay trays on a level surface to obtain a uniform depth, and inoculate the seed layer with the test organism after cooling to 40-45°C. Use freshly prepared plates. Test the finished medium for performance using stable, standard control cultures.
Product highlights
- Food-grade raw materials, produced in an ISO 22000 certified facility
- Manufactured to the standard formulation, 62.5 g per litre
- Available in 500 g / 5 kg / 25 kg, from laboratory to industrial scale
- COA, specification sheet, and technical data sheet available; samples on request
- Manufactured in Taiwan with reliable supply
Food grade versus laboratory grade
Most culture media suppliers use laboratory-grade raw materials, which are held to lower standards for heavy metal residues, microbial contamination control, and traceability. That is adequate for pure research but not for applications with stricter raw-material requirements. STBIO manufactures with food-grade raw materials throughout, in a facility certified to ISO 22000 food safety management.
- Food microbiology laboratories working to ISO 17025 or equivalent requirements
- Biotech manufacturers exporting fermentation products and needing full raw-material traceability
- Organisations with ESG or compliance audit requirements across their supply chain
- Companies sourcing both Halal and non-Halal products who need one consistent material grade
Frequently asked questions
01How much powder per litre?
Use 62.5 g per litre of deionised water; preparation and sterilisation conditions are given on the specification sheet.
02Which organisms is it suitable for?
Yeast, S. cerevisiae. See the cultural response table and the specification sheet.
03Can it be used for food-grade applications?
Yes. It is made from food-grade raw materials in an ISO 22000 certified facility and is suitable for culturing starters for fermented products that are consumed directly.
04How is this product prepared?
Suspend 62.5 g of powder in 1 L of purified water. Heat with continuous stirring and bring to the boil for 1 minute. Sterilize by autoclaving at 121°C for 15 minutes. Cool to 45-50°C. Dispense into Petri plates or assay trays on a level surface to obtain a uniform depth, and inoculate the seed layer with the test organism after cooling to 40-45°C. Use freshly prepared plates. Test the finished medium for performance using stable, standard control cultures.
05Is there a Halal certified version of this product?
Yes. This is the standard version; a Halal certified version is also produced from food-grade raw materials with Halal documentation, for compliant sourcing in Malaysia, Indonesia, and the Middle East.
06How do I request a bulk quotation, and can you provide a COA?
Yes. This product is available in 500 g, 5 kg, 25 kg. Tell us your application and volume when requesting a quotation; we reply within one working day and can supply the COA, specification sheet, and technical data sheet.
Used in these applications
References
- 1. United States Pharmacopeia, current edition. Chapter <81> Antibiotics — Microbial Assays, USP-NF, Rockville, MD.
- 2. Grove D. C. and Randall W. A., 1955. Assay Methods of Antibiotics: A Laboratory Manual, Medical Encyclopedia, New York.